Vaso Venus - Homee Creations - Free 3D Print Model

Search models, users, collections, and posts

Homee Creations

Household>Decor

IP Report

Print Profile(8)

All

H2D Pro

H2S

P1S

A1 mini

H2D

H2C

X1 Carbon

P1P

X1E

P2S

X2D

A2L

70mm height, spiral mode, 0.2mm layer, 1 walls, 0% infill

Designer

53 min

1 plate

4.8(56)

70mm height, 0.2mm layer, 2 walls, 15% infill

Designer

2.8 h

1 plate

4.9(41)

90mm height, spiral mode, 0.2mm layer, 1 walls, 0% infill

Designer

1.2 h

1 plate

4.7(21)

90mm height, 0.2mm layer, 2 walls, 15% infill

Designer

3.4 h

1 plate

4.9(17)

Click to see more

Open in Bambu Studio

Boost

1378

3921

303

4.3 k

2.5 k

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

if you like the model support me with a Boost!

Venus Vase - minimalist design model with sinuous lines

Available in various heights: 70, 90, 120, 150, 200mm

Update of 01/30/2025:

I slightly modified the model so that it can be printed faster using "Spiral" mode. I suggest using it for smaller model sizes and for a quick preview of what the final print might look like using ordinary mode (greater thicknesses and greater strength)

Boost Me (for free)

if you like this model help me create more with a Boost!

click here to see my other creations

Valentine Flower Vase

Orbit Vase

Venus Flower Vase

Venus Tealight holder

Venus Planter

Venus Vase

Venus Pen Holder

Vases - Organizers - Pen Holders - Fantasy World - Children's World - for the home

Comment & Rating (303)

@hobnobrob2000

Boosted

Print Profile

90mm height, spiral mode, 0.2mm layer, 1 walls, 0% infill

Came out very nice. Printed with Sunlu Olive Green PETG 👌🏻

The profile uploader has replied

@walker73

nice print! I'm really glad you enjoyed the print. Support the model by pressing "Boost" button!

@hobnobrob2000

Boosted

Replying to @walker73 :

Just boosted 🙏🏻

@walker73

Replying to @hobnobrob2000 :

thanks for support!

@user_652799967

Boosted

Print Profile

200mm height, 0.2mm layer, 2 walls, 15% infill

Absolutely beautiful!!

The profile uploader has replied

@walker73

very nice! I really like the material and the color

@Geschaft

Could you say what color is used here? )

@user_652799967

Boosted

Replying to @Geschaft :

VOXELAB Chameleon HS PLA Abyssal Red

(Edited)

@koenlab

Boosted

Print Profile

70mm height, spiral mode, 0.2mm layer, 1 walls, 0% infill

It only has that small detail on the base I printed it with Wood PLA Do you have any advice

Show original

@RIRE

Did you dry the filament?

@koenlab

Boosted

Replying to @RIRE :

No, the filament was new, just taken out of its vacuum-sealed bag

Show original

@RIRE

Replying to @koenlab :

You must dry wood filament always before use. Even when it's a new one. I have seen a movie about testing how much moisture two different filaments, bambulab and another brand. Bambulab had twice as much than the other brand. So always dry it before you put it in your printer, you will get a much better result.

@Karlldann

Boosted

Print Profile

120mm height, spiral mode, 0.2mm layer, 1 walls, 0% infill

Top!

The profile uploader has replied

@walker73

thanks! if you like my model consider to support it with a Boost

@paulocrepaldi

Print Profile

90mm height, 0.2mm layer, 2 walls, 15% infill

beautiful piece

The profile uploader has replied

@walker73

thanks! if you like my model consider to support it by pressing th "Boost" button

@user_1581311498

Print Profile

120mm height, 0.2mm layer, 2 walls, 15% infill

bambu lab beige but very pink😅

The profile uploader has replied

@walker73

nice print! I'm really glad you enjoyed the print. Support the model by pressing "Boost" button!

@user_1424783432

Print Profile

90mm height, 0.2mm layer, 2 walls, 15% infill

Very nice birthday gift. Printing was very fast with little filament. Print result is good. Thank you very much

The profile uploader has replied

Show original

@walker73

nice print! I'm really glad you enjoyed the print. Support the model by pressing "Boost" button!

@Debsthingy

Print Profile

70mm height, spiral mode, 0.2mm layer, 1 walls, 0% infill

adorable!!!!!! thank you!

The profile uploader has replied

@walker73

I'm really glad you enjoyed the print. Support the model by pressing "Boost" button!

@user_2053143254

Stunning vase, I'm a beginner and this is one of the first models I've tried, and I must say it's stunning

Show original

@walker73

I'm really glad you enjoyed the print. Support the model by pressing "Boost" button!

@user_2687048556

Print Profile

120mm height, spiral mode, 0.2mm layer, 1 walls, 0% infill

The only thing I didn't consider, because my wife was going to use a plant that only needs water, is that it ended up leaking through several tiny holes. I believe that if I added more bottom layers and more walls, it would solve this problem, just a tip for those who are going to print 😁

The profile uploader has replied

Show original

@walker73

for water resistance you can use standard print profile and no "spiral mode"

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Vaso Malice - Homee Creations

Homee Creations

1.8 k

593

Venus de Milo

Bunk.Wire

1.8 k

618

Vaso LV

LayerFY

2.4 k

1.5 k

vase

Zamzi3D

3.3 k

1 k