Storage Box for Empty Batteries

ATTENTION!! Important Update!!

Since some users reported that the supports detach during printing, I have changed the container's geometry. It is now slightly smaller inside but no longer requires ANY supports. In addition, the filament consumption has slightly decreased AND the total print time has been reduced by a good 10%


After having been looking for a somewhat larger storage solution for my old batteries (>20 pieces) for some time and not finding anything suitable, here is my own design. A storage box with a screw lid that is stable enough to hold the weight of more than 80 batteries and can then be safely transported to a disposal facility. The STEP file has the original dimensions of approx. 160x160x130mm (LxWxH). Since it was too large for me, I scaled it to 90% in the finished print profiles

As a test, I have already scaled it to 50% and the screw cap still works perfectly

I printed the model in PLA as that was sufficient for me

For me, the supports were always easy to break out

If someone needs a version without a slot in the lid or without a battery symbol I can gladly add it