IKEA Skadis Headphone Hanger / Holder (55mm wide) Remixed by AU3D

Remixed by

AU3D

Tools>Organizers

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

1.3 h

1 plate

4.9(28)

for A1 mini | 0.2mm layer, 3 walls, 15% infill

Designer

1.4 h

1 plate

4.3(3)

Lock Plug 12mm | 0.2mm layer, 2 walls, 15% infill

Designer

11 min

1 plate

Open in Bambu Studio

Boost

131

263

207

Released

Description

This is a simple adaption of Tridense wall mounted headphone hanger to be used with an IKEA Skadis board. The hooks need support. The headset depicted in the image is the Logitech G Pro X, a moderately-sized gaming headset.

Lock Plug

I experienced pretty good friction between the hanger and the board but if the holder tends to slide out of the pegboard holes when you retrieve your headphone, consider printing the IKEA Skadis Lock Plug in 12mm I attached. Depending on your print settings, filament and board, you might have to choose another size.

Skadis Collection

I am constantly developing more IKEA Skadis attachments. Check out my IKEA Skadis Collection here.

Comment & Rating (43)

@epochtrends

Print Profile

0.2mm layer, 3 walls, 15% infill

Excellent print, had to use a brim for better adhesion. thank you!

The designer has replied

@AU3D

Thank you for your feedback. I strongly recommend purchasing a golden textured PEI plate. Its adhesion properties are exceptional. Since using it, I've encountered no issues whatsoever.

@epochtrends

Replying to @AU3D :

I agree! I also use the golden textured PEI plate.

@GadgetgurlVR

Print Profile

0.2mm layer, 3 walls, 15% infill

excellent!

@FreshAsTheD

Print Profile

0.2mm layer, 3 walls, 15% infill

Feels great and matches all of the skadis set (so long as you can find a finish like your current accessories) But the Inland PLA+ is works great to match their white set

@user_1662881106

Boosted

Great Item and strong print

@christuney

Print Profile

0.2mm layer, 3 walls, 15% infill

works great thanks petg

@Buddy241

Print Profile

0.2mm layer, 3 walls, 15% infill

Wurde mit Sunlu Meta Filament auf generic settings gedruckt. hat alles soweit problemlos funktioniert

@anders.nsson

Print Profile

for A1 mini | 0.2mm layer, 3 walls, 15% infill

Strength Issue:first one broke Easley but added more fill strength

The designer has replied

@AU3D

Do you have a picture of the broken piece?

@anders.nsson

Replying to @AU3D :

sorry i threw it away=( But mayby I did have wrong settings on the strength?

@AU3D

Replying to @anders.nsson :

No problem, was just wondering which part broke as there has not been a report of a failed print yet.

@Thranemeister

Print Profile

0.2mm layer, 3 walls, 15% infill

Perfect for my earprotection

@Sinhar27

Print Profile

0.2mm layer, 3 walls, 15% infill

Support Issue:supports didn't print properly

Bed Adhesion Issue:warped on one corner neither are faults of the print...just an issue with the printer

The designer has replied

@AU3D

If you know that it is an issue with your printer, why would you still give the print profile a bad rating?

@Sinhar27

because there were still problems with the print it was a tight fit on the board

@AU3D

Replying to @Sinhar27 :

Can you provide a picture of the hooks from two angles so I can take a look at the problem?

@cyrilver

Print Profile

0.2mm layer, 3 walls, 15% infill

il faut rajouter une brim.

(Edited)

The designer has replied

@AU3D

Merci de partager vos commentaires. Bien que je comprenne vos préoccupations, je pense que le problème que vous rencontrez est spécifique à votre configuration. Les facteurs potentiels pourraient inclure un lit d'impression sale, un étalonnage inapproprié, un filament de faible qualité, des réglages incorrects ou une plaque de construction inadaptée. Si c'était un problème répandu, je m'attendrais à recevoir de nombreuses demandes d'ajout de bordures. Généralement, j'évite d'utiliser des bordures par défaut pour minimiser les étapes de prétraitement. Cependant, je sympathise avec votre situation car j'ai rencontré des défis similaires lorsque j'ai commencé l'impression 3D. Mon expérience s'est considérablement améliorée après être passé à une feuille PEI texturée dorée, ce qui a presque complètement éliminé de tels problèmes. De plus, l'entretien est minimal – je me retrouve à nettoyer la feuille seulement une fois toutes les 10 impressions environ. --- Thank you for sharing your feedback. While I understand your concerns, I believe the issue you're experiencing might be unique to your specific setup. Potential factors could include a dirty print bed, improper calibration, low-quality filament, incorrect settings, or an unsuitable build plate. If this were a widespread issue, I would expect to receive numerous requests for adding brims. Generally, I avoid using brims by default to minimize preprocessing steps. However, I empathize with your situation as I encountered similar challenges when I first started 3D printing. My experience improved significantly after switching to a golden textured PEI sheet, which almost completely eliminated such issues. Additionally, the maintenance is minimal – I find myself cleaning the sheet only once every 10 prints or so.