Super Mario on the pipe Switch Game Cart Holder

I am presenting new two level box for Nintendo Switch Cartridges. 
2 versions can be printed. 1 for AMS, 1 can be printed without AMS

Box is for 20 cartridges and has two levels:
Lover level - 8 cartridges
Upper level - 12 cartridges.

Instructions:
____________________________________
Multicolor version with Mario (5 colors, but it is also AMS lite friendly as there is no more than 4 colors on one plate):
1st Plate - pipe print with green
2nd plate lid for top part of the pipe (it is also stand for Mario) - print with black
3rd plate - Mario - print with beige(or white), red, blue and black

Assembly:
1. Join both part of the pipe (you might need to twist it in a bit, but it should be sticking ok)
2. Put black lid on the top part of the pipe
3. Put Mario on the lid (if you want it to stick permanently, put two drops of glue, one drop per leg, into holes for Mario's legs and then insert Mario)

____________________________________
No AMS version - without Mario, only pipe.
1st Plate - pipe print with green
4th plate lid for top part of the pipe (it is has no holes for Mario's feet) - print with black

Assembly:
1. Join both part of the pipe (you might need to twist it in a bit, but it should be sticking ok)
2. Put black lid on the top part of the pipe