Search models, users, collections, and posts
Auston Matthews - Hueforge
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
5.8 h
1 plate
Open in Bambu Studio
Boost
13
34
7
2
33
20
Released
Description
Project: Mathews Hueforge DARKER.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150.4x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Matte Navy Transmission Distance: 0.6
PLA Bambu Lab Cobalt Blue Transmission Distance: 3
PLA Bambu Lab Gray Transmission Distance: 3
PLA Bambu Lab White Transmission Distance: 6
Swap Instructions:
Start with Matte Navy
At layer #9 (0.8mm) swap to Blue
At layer #14 (1.2mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (7)