Search models, users, collections, and posts
Soft Jaws for Vice, 4 and 5 Inch wide
IP Report
Print Profile(2)
Soft Jaws for 5 inch Vice V1
Designer
7.1 h
3 plates
Soft Jaws for 4 inch Vice V1
Designer
5.8 h
3 plates
Open in Bambu Studio
Boost
25
77
12
1
117
71
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Bambu Filaments
Select all
Description
Two Print Profiles are included; one for 4 inch wide vices and the second for 5 inch wide vices. These soft jaws are held on the vice by 10x3mm magnets. The 3MF defines multiple plates, each with a different infill density to get a different softness. Using Bambu TPU for AMS filament; 100% infill parts are very hard. 50% infill are slightly softer. The 15% infill are fairly flexible, deforming nicely for lightly holding parts. The 100 and 50% infill versions can be clamped very tightly to rigidly hold a part without maring its surface.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (12)