Genshin Impact Pyro Archon Murata Lithophane Fridge Magnet

I've crafted a relief of the recently released Pyro Archon from Genshin Impact, measuring 10cm in diameter. A soft magnetic sheet can be affixed to the back for use as a refrigerator magnet.

To achieve the desired effect, I utilized five colors, allowing for a pause and color change after completing the black layer. Those without an AMS can manually pause and swap filaments. All filaments used are Bambu Lab PLA.

Specific parameters are as follows:

100% infill print, 0.1mm layer height, 0.2mm base layer

Model dimensions are 100x100mm, with a thickness of 1.6mm
Filaments used:
Bambu Lab PLA Basic Black, feed distance: 0.6
Bambu Lab PLA Basic Red, feed distance: 4
Bambu Lab PLA Basic Orange, feed distance: 7
Bambu Lab PLA Basic Yellow, feed distance: 6
Bambu Lab PLA Basic Jade White, feed distance: 5
Begin with black
Switch to red at layer 5 (0.6mm)
Switch to orange at layer 8 (0.9mm)
Switch to yellow at layer #10 (1.1mm)
Switch to Jade White at layer 11 (1.2mm), for the remaining portion.