Anycubic Chiron - V6 Dragon Hotend - Direct Drive

Instructions are included as a PDF. I hope they are easy to understand :-)

Almost everything is designed to be printed without support material. A layer height of 0.2mm is necessary for this.

Only two parts require support. This concerns the files "back part 1" and "back part 2".

I printed the parts in ABS. I don't know how well it works with PETG.
ABSOLUTELY do not print with PLA ;-)

I designed the print head for the Dragon-Hotend. I assume that the V6-Hotend would also fit. I haven't tested this.

The nozzle remains in exactly the same position in X and Y.
In Z it moves 7mm upwards, which is why the Z-endstops must also be moved downwards.

The pictures show that I used a different cable chain. The original Anycubic cable chain can also be used.

The Anycubic bed leveling sensor, which is attached with a magnet, can also continue to be used.

You will need to lengthen the cable for the extruder motor and feed it through the cable chain.

The original E3D Titan extruder does not fit ... perhaps with a 3mm adapter plate, but I haven't tested that.

Print Settings

Supports:

Yes

Resolution:

Filament:
Sunlu ABS

Category: 3D Printer Parts