Build Plates Dryer - bent plate

I was tired of drying my bulid plates on the sink, falling every time… therefore I've designed a decent dryer.
And here it is - dryer in a form of bent build pate :) I hope it will be useful. 

You can dry up to 3 plates at the same time.
There are 4 variants:

• P1/X1 plate
• P1/X1 plate with droplets
• A1 mini plate
• A1 mini plate with droplets

A1 mini plates are a bit smaller than the rest but still can handle the big plates.

You can use it as a regular stand for the plates as well.

Printed with PLA Metal:

• 0.4mm nozzle
• 0.2mm layer height
• 2 walls
• 8% honeycomb infill

I've printed it on the SuperTack build plate as it have some narrow areas and I strongly recommend doing the same.
Try brims if you don't have SuperTack plate (but you should really get one as it makes life much easier).