VektorCRO

cover

Ovca titl.jpg

Ovca 09.jpg

Na roli.jpg

Glavna 2.jpg

Ovca explainer.jpg

Ovca 03.jpg

Ovca 04.jpg

Ovca 01.jpg

OUR MAKERS.jpg

plate_1.png

plate_2.png

2025-01-12_d61ea91c501e4.jpg

0.2mm layer, 2 walls, 10% infill

Sheeptastic 2.0

Eyes

Sheeptastic 2.0 01.jpg

Sheeptastic 2.0 02.jpg

Sheeptastic 2.0 04.jpg

<ul><li>0.2 Layer height</li><li>Optimized base print surface</li><li>Added brim to parts</li></ul>

Version 2.0 - Selective fuzzy skin and screw in connector

Piothr

image0.jpeg

This is a slightly revised print profile:<ul><li>Rotated the head and added fuzzy skin so the layer lines are less visible</li><li>Added brims to ensure good layer adhesion as I printed mine with PETG (Bambu PETG-HF)</li><li>Changed the supports settings to make the footprint of the head bigger - also to promote adhesion</li><li>Altered the seam position to further enhance the print</li></ul>The brims and gigantic supports may be a little excessive, but those settings add just a few more grams of filament and in my opinion are worth it.

All parts, no eyes, head upright - fuzzy skin

Jig.S.aW

IMG_20250216_124624.jpg

IMG_20250216_140137.jpg

IMG_20250216_140158.jpg

The head is printed with variable layer hight making the nose much smoother with out the need of reorienting it (more supports needed). The seams of the belly and the feet are placed on the underside and backside to make them less visible. (Photos show side by side comparison of original print profile and the updated one).On the second plate a pause is added to print the eyes with two colors without AMS and a manual filament color change.

variable layer hight, altered seams, no AMS

ANCHEL

IMG_7172.jpeg

IMG_7173.jpeg

Un par de ojos para la cara de la oveja con tamaño de pupila diferente sólo necesita un poco de pegamento y listo

A pair of eyes for the sheep's face with different pupil sizes only needs a little glue and you're done

Two types of eyes with different pupil sizes

Magmoria

IMG_20250402_173208.jpg

IMG_20250402_172228.jpg

IMG_20250402_172253.jpg

0.2mm layer, 2 walls, 10% infillChanged some settings to reduce print time and weight.&nbsp;Manually painted seam, as you can see in photos.&nbsp;This profile contains 2 plates. &nbsp;Plate 1:<ul><li>3 Funny sheep with fuzzy head version</li></ul>Plate 2:<ul><li>1 Funny sheep with Fuzzy head version</li></ul>Have fun!&nbsp;

plate_3.png

B3rg3r

20251225_161132.jpg

20251225_161128.jpg

Print bed adhesion optimized & Variable layer height (Head)

V 2.0 Single plate

raladic

20260325_233343900_iOS.jpg

Sheeptastic_SinglePlate_fitted.png

SheepTastic_SinglePlate_fitted_sliced.png

Using the neat trick of print by object and grouping the all-black parts into one assembly, which means those are printed by-layer, allows the printer to first print the white eyes, then switch to black for the pupils and then print the rest of the black assembly, so no purging tower needed and it&#39;s safe from collisions.&nbsp;The base for this profile was derived from the <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/981625-sheeptastic-toilet-paper-sheep-holder-fits-all#profileId-2518142">Sheeptastic V2.0 profile</a> by @<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@VektorCRO">VektorCRO</a> which adds Fuzzy Skin to hide layers and attaches the head to the spring using a screw. Aside from combining everything onto a single plate, I also made a few more setting optimizations for the print.&nbsp;Print settings:Layer Height: 0.2mmWalls: 2Infill: 3%Supports: YesAMS: Yes Fuzzy Skin: Yes (painted on parts that are visible)Print by Object: Yes (grouped into two assemblies, one for the eyes, and one for the all-black/single color pieces)

Single Plate+ AMS, V2.0-fuzzy skin+screw-in / 0.2mm/2wll/3%

Fred Myles

IMG_9596.jpeg

These Are The settings I Have Used To Print Over 500 Of These Sheep

3 Sheep One Plate With Optimized Supports No Eyes

3 in 1 - single plate, V2.0, Fuzzy, AMS

20260327_012705350_iOS.jpg

Sheeptastic_3sheep_1plate_finishedprint.jpg

SheepTastic_3sheep_singleplate_Preview.png

SheepTastic_3sheep_SinglePlate_Sliced.png

After my successful combining everything into a plate for one sheep with this profile -  <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/981625-sheeptastic-toilet-paper-sheep-holder-fits-all#profileId-2837420">Single Plate+ AMS, V2.0-fuzzy skin+screw-in / 0.2mm/2wll/3%</a>, I went one step further and made 3 sheep fit on the single plate.I also optimized the arrangements so that the parts that use supports share the support base tower where possible to produce less waste and speed up the print.&nbsp;Using the neat trick of print by object and grouping the all-black parts into one assembly, which means those are printed by-layer, allows the printer to first print the white eyes, then switch to black for the pupils and then print the rest of the black assembly, so no purging tower needed and it&#39;s safe from collisions.&nbsp;The original base for this profile was derived from the <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/981625-sheeptastic-toilet-paper-sheep-holder-fits-all#profileId-2518142">Sheeptastic V2.0 profile</a> by @<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@VektorCRO">VektorCRO</a> which adds Fuzzy Skin to hide layers and attaches the head to the spring using a screw. Aside from combining everything onto a single plate using the above trick, I also made a few more setting optimizations and arrangements to reduce the amount of support structures needed by placing parts that have supports adjacent to each other where possible, which saves further print time.&nbsp;Print settings:Layer Height: 0.2mmWalls: 2Infill: 3%Supports: YesAMS: Yes Fuzzy Skin: Yes (painted on parts that are visible)Print by Object: Yes (grouped into two assemblies, one for the eyes, and one for the all-black/single color pieces)

3 sheep on one plate+AMS,V2.0 fuzzy skin+screw/0.2mm/2wll/3%

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

UPDATE: &nbsp;We have added a new profile for even better print!<ul><li>Added selective fuzzy skin to head and feet, layer lines are no longer visible</li><li>Base of the head is flat so it is easier to print</li><li>New spring attachment system with threads</li></ul>❤️ Most of all I wanted to thank you all for supporting me with over 1000 boost 🚀 and countless downloads,prints, comments and photos. It really means a lot. Thank you all again and I love seeing your comments and photos of our little friend. God bless you. <boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you for your support</boostcontent></boostme>Thank you all for downloading and have a sheeptastic day!<ul><li>all photos uploaded are of the actual printed model, and are copyright protected</li></ul>&nbsp;Want to sell prints? Join and sell.<commercialme><commercialtitle>Membership</commercialtitle><commercialcontent>Commercial license package</commercialcontent></commercialme>--------This charming sheep toilet paper holder is designed to hold a single roll of paper, but the fun doesn’t stop there! By stacking multiple sheep, you can create an endless supply of paper storage with no limit. The feet are easily interchangeable, making it convenient and versatile. Suitable for most roll sizes, this unique design is sure to bring a smile every time you see it. Whether for yourself or as a gift, this playful toilet paper holder is guaranteed to brighten up any bathroom!&nbsp;Really easy to printNozzle size: 0.4 mmLayer height: 0.2 mmTree or standard supportGlue the spring to head with any glue for plastic.Most standard settings will work. 200 degree for PLA works fine.Recommended matte black color. Eyes white.&nbsp;💰 If you are interested in reselling the physical product based on this model and require bulk production, please feel free to contact me. (EU market)💰

Sheeptastic! Toilet Paper Sheep Holder - FITS ALL!

ASIA

Print Profile(10)

Description

Comment & Rating (2072)

License

Related Models