Computer port and cable covers, USB, DisplayPort, HDMI - Free 3D Print Model

Search models, users, collections, and posts

tuuza

Household>Office

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 15% infill

Designer

29 min

1 plate

4.7(56)

0.2mm layer, 3 walls, 5% infill

21 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

290

1133

1.4 k

764

Released

Description

Covers for your PC's or other devices ports and cables to keep dust and dirt away.
If you have fitment issues, especially in the cable end covers. Try scaling the model up or down just a tiny bit.

Included:
DisplayPort
HDMI

USB-A

Boost Me (for free)

If you like the model please leave a comment and boost the model.

23.1.2025
Added covers for cables.
Changed print direction for more strength in pulling direction.
Changed supports for easier removing.

Please note:
To avoid any harm to your connectors, please do not try to use any excessive force while inserting the covers.
All above mentioned connectors have spring tensioners, so you should feel small resistance.
I have tested these on my PC and laptop ports without any issues, but connectors may slightly vary by manufacturer.

Only use at your own risk.

Comment & Rating (66)

@regrub_ibaf

Print Profile

0.16mm layer, 3 walls, 15% infill

Protects the ends of cables while pulling them through the horrible isolation 👍🏻

@Smart.3d

Print Profile

0.16mm layer, 3 walls, 15% infill

very good! simple models to protect the ports on the computer and the end of the cables.

@CreatorC

Print Profile

0.16mm layer, 3 walls, 15% infill

Printed perfectly, supports could be a little difficult to remove (but expected on such a small piece, and understandably necessary for the detail), but it worked perfectly for the computer I was working on. I had a computer that had 2 ports that couldn't be used (not enough headers), so the blank inserts fit and work perfectly. Thank you for the model!