Zero Clearance Insert Plate SKIL Miter saw 10in
Print Profile(1)
Description
This is a Zero Clearance insert for the 10in SKIL miter saw MS6305-00. This is a direct replacement for the stock plate and will allow you to make cleaner cuts.
- You will need TWO M3x12 bolts to connect the 2 parts together (snug fit). You could also use glue only but will be much less stable and I would not recommend it.
- Once installed, SLOWLY bring the blade all the way down to the plate to make the kerf cut.
PLA works great, but PETG or other stronger material can be used too.
This is intended to be installed on a powered tool, so be smart about it and don't use it if you don't feel comfortable.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)