VOGUE Hueforge Bookmarks - 2 sizes
Print Profile(2)
Description
If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben
VOGUE Hueforge Bookmarks - 2 sizes
Large 65mm x 200mm Bookmark
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x200mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 3.1mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5.8
PLA BambuLab Matte Sakura Pink Transmission Distance: 2.3
PLA BambuLab Basic Black Transmission Distance: 0.2
This print uses 3 unique filaments
***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***
***the layer numbers will be different but the layer height will be the same***
Swap Instructions:
Start with Jade White
At layer #15 (1.28mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Black for the rest.
Small 50mm x 150mm Bookmark
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.03x150mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 3.1mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5.8
PLA BambuLab Matte Sakura Pink Transmission Distance: 2.3
PLA BambuLab Basic Black Transmission Distance: 0.2
This print uses 3 unique filaments
***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***
***the layer numbers will be different but the layer height will be the same***
Swap Instructions:
Start with Jade White
At layer #15 (1.28mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Black for the rest.
More Bookmarks can be found here
Hueforge Bookmark Book Nook can be found here
Check out my other models and hueforge files here
Don't forget to post pictures of your prints! Enjoy!
Boost Me (for free)
If you like and enjoy the model and want to encourage me to continue to make more models like this, then send me a boost!
Hope you enjoy!
Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)