NFC215 box 25 cards Zelda

I had some NFC tags laying around, and i needed a way to store them.
I found this https://www.printables.com/model/258431-rugged-box-parametric/comments which had a parametric file, so i edited it to hold 25 cards.
I added a the Hylian Shield to it, because this holds my ‘amiibo cards’ for Zelda BOTW.

I printed it in PLA, 10% infill.
The seal, if needed, would best be printed in TPU, but i didn't bother.
You will need 6 m3x30 screw to serve as hinges.

As for the pictures;

I printed this with Eryone Gold Silk and GST3D black , both in PLA.
300mm/s, 230°, 0.2layer height, 2 wall, 3 top and 3 bottom layers. On a 0.4 nozzle.
Printed on a PET carbon fiber sheet, hence the motive.

In the files;

box-zelda-hinge2x.stl ; print this twice

box-zelda-seal.stl : print this in TPU, but the part is not required. (maybe helps for some waterproofing, but has no use for me in this project)

box-zelda.3mf 3MF precolored file, make sure to print the seal seperatly and in TPU

box-zelda.stl : main bottom part

box-zelda-lid.stl : main top part, has the hylian shield embedded into it

box-zelda-hylianshield.stl : just an stl of the hylian shield, just in case of