adminbranko

Working multi-color profile without AMS required

user_1304683500

Sea3D

Yeah fully agree with you. It's not my model. I only created the profile and did the coloring. I also had to use a lot of glue. You might see my initial feedback to the designer as well. 

Oliver

the male connectors are nicely sized but the female connections are too loose. similarly, the posts to hold the roof can’t fit by themselves so you’ll have to glue/fasten but unclear how. there are holes on the supports but can’t figure out which direction they should go and they aren’t centered.

lastly, the two-to-one track has very sharp triangles that I’d recommend smoothing for younger kids, even as an adult I found it sharp.

Can you please upload a picture and show what exactly is not working? What material have you used for the print? 

Track stop piece does not connect as shown in the picture.

0.2mm layer, 2 walls, 15% infill

The barrier requires supports, the long pieces that are under the roof require brim.

Only a single layer under the 4 blocks holds the roof, which easily breaks with minimal pressure from above. This is for children... 

A female-female connector between the stop and the station is missing. 
The Washstand parts are in the picture but not in the model/profile. 

The 3 blocks that hold the roof in front do not fit. I needed my Dremel.

I will upload a working profile. Don't use the designer profile. 

jomajo1988

cover

plate_1.png

plate_2.png

washingstation_d2f139a9-599c-4601-868b-86d3cbc094c9.webp

plate_3.png

plate_4.png

plate_5.png

plate_6.png

PXL_20240207_221507421_de26eb75-a971-44f0-ad39-41ce60f3f45a.webp

PXL_20240207_221531342_cf2cd257-3b4c-4140-887e-fb24e656eed6.webp

wasching-station_36aac58d-7c62-4ebc-bf99-e51b85e106ac.webp

PXL_20240207_214418951.MP_680e2501-e499-49d9-b1f2-53399c80959f.webp

PXL_20240206_204444786_268e2e14-491f-45ee-b4eb-446c1714b275.webp

<ul><li>5 colors - no AMS needed as every color is on a separate plate to reduce print time and waste</li><li>minimal support is needed for the cabinets and roof</li><li>brim is needed for the washstand</li><li>Infill for the tracks is reduced to 10%</li></ul>My print was printed with: <ul><li>GEEETECH PLA wood</li><li>Bambulab PLA Basic Cyan</li><li>Bambulab PLA Basic Red</li><li>Bambulab PLA Matte Grey</li><li>eSUN PLA+ Black</li></ul>Assembling tips:<ul><li>Use 2x M3x8 countersunk screws to fix the cabinets</li><li>Use 1x M3x12 countersunk screws to fix the cabinets from below</li><li>Glue all parts together</li></ul>

Train WashingStation - Brio compatible

Print Profile(2)

Description

Comment & Rating (7)

License

Related Models