ironwolfusa

0.12mm layer, 2 walls, 15% infill

Topshot

Der relativ flach auslaufende, weil kugelförmige Ausgang zur Hülse dürfte gerne etwas mehr konisch sein. Sehr feines Kugelpulver (zB Lovex D032) muss mit etwas "klopfen" bis zum Loch geschüttelt werden, das bleibt an der relativ flach auslaufenden, kugelförmigen Mulde gerne leicht hängen.
Wenn der Ausgang zur Hülse (vertikal gestellt, der kleine Trichter nach unten) etwas steilere Wände hätte, würde das deutlich besser klappen.

Aber trotzdem ein wirklich tolles Modell! Mit anderen, gröberen Pulvern wie VV340 usw. keine Probleme. 
Endlich ein ähnliches Pulver-Pfännchen wie die Lyman Powder-Pan! Danke dafür!

The relatively flat outlet, because it is spherical, should be a bit more conical towards the sleeve. Very fine ball powder (e.g. Lovex D032) has to be shaken to the hole with some "tapping", which tends to get stuck a little in the relatively flat, spherical recess.
If the outlet to the sleeve (placed vertically, the small funnel downwards) had slightly steeper walls, it would work much better.

But still a really great model! No problems with other, coarser powders like VV340 etc.
Finally a powder pan similar to the Lyman Powder-Pan! Thanks for that!

Spartan117

Druck top, aber die Spitze ist störend bei Verwendung mit elektronischen Pulvertricklern. Folglich ist eine Anpassung erforderlich.

Print top but the tip is interfering when used with electronic powder tricklers therefore an adjustment is necessary

doc-andreas

arisaka 3D

Just started reloading - I'll give this a try.  Looks like a cool idea.  Any issues with static and powder sticking?

SteveKratz

Thorsten Graeber

user_1849364748

user_90979050

user_1817304642

cover

IMG_8552.JPEG

plate_1.png

2025-01-10_ffb46a49666ef.jpeg

<p>print standing on the funnel and use 0,12 layer height and tree support</p>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Powder pan with funnel. fits cal 22 to 9,3</p><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like this i would lova a boost</boostcontent></boostme>

Print Profile(1)

Description

Comment & Rating (13)

License

Related Models

Reloading Powder pan with funnel

Print Profile(1)

Description

Comment & Rating (13)

License

Related Models