Fidget Tri-Spinner Knurled 608 Bearing - Free 3D Print Model

Search models, users, collections, and posts

idnarbjm

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 25% infill

39 min

1 plate

4.9(28)

0.2mm layer, 2 walls, 75% infill

46 min

1 plate

4.8(20)

Open in Bambu Studio

Boost

419

410

Released

Description

I marked this as a remix, but I just copied the cap placement because it made perfect sense to put them there. I saw one of these on youtube and had to make it. It uses 608 bearings. I used a block of wood and a hammer to get the bearing in. They fit great.

I didn't love the caps that are part of this file so I made some new ones.

http://www.thingiverse.com/thing:1848330

Print Settings

Rafts:

Supports:

Resolution:

Infill:

75%

Notes:

I wanted it more solid for the weight. You don't have to print it at 75%

I always design on the wrong plane for printing so you'll have to rotate it on the X axis -90 Degrees.

Category: Other

Documentation (1)

Other Files (1)

SOURCES.txt

Comment & Rating (54)

@AndrewDaGreat

Print Profile

0.2mm layer, 2 walls, 25% infill

really good model and I loved the texture on the outside. I used some bearings that I got from a different fidget spinner and it spins well. my only complaint is that the parts that go inside the middle bearing are a bit loose and just fall out. I solved this issue with my 3d pen but it is something that mabye could be improved. overall great model.

@user_324529796

Printed Great. best to use the male cap from his alternate caps with one of the original caps with the print

@marm0t

Print Profile

0.2mm layer, 2 walls, 75% infill

Exactly what I need! perfect!

@TurboTime32

Print Profile

0.2mm layer, 2 walls, 25% infill

buttons don’t fit in my bearing (too loose) but the spinner itself printed perfectly!

@Schairtail

Print Profile

0.2mm layer, 2 walls, 25% infill

Printed great and spins great without middle covers. covers could go a little deeper so they don't rub on the spinner. Thanks for a almost great model

@zackza

Print Profile

0.2mm layer, 2 walls, 75% infill

I used the 608 bearing here on makerworld (the clear petg photo) and glow in the dark pla by duramic (lowest priced glow pla on amzn) it glows so bright after charging up with a halogen kitchen light hah you can read a book by it. I wanna make some custom ones with little glow in the dark notches and ams patterns so it makes different patterns while spinning like those spinning digital clocks.