Pokeball V1.0 - Free 3D Print Model

Search models, users, collections, and posts

Gonz Heredia

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

5.9 h

4 plates

4.6(20)

0.2mm layer, 2 walls, 3% infill

8.3 h

5 plates

5.0(5)

Open in Bambu Studio

Boost

1176

3072

1.6 k

523

Released

Bill of Materials

List other parts

3mmx1.5mm-Magnets x 2:
8mm-Hinges x 1:

Description

I had been wanting to make a Pokeball with my printer for a while, and although I had initially thought of using one of the existing models, this time I wanted to make the model from scratch. I was inspired by several of the existing models on the internet and I share the result I got to.

I must clarify that this model is not completely printed, it needs two 3mm x 1.5mm magnets to operate the button and an 8mm barrel hinge to join the upper part with the lower part. I have used the following:

I recommend printing the outer parts with a 0.1mm layer height. The model is designed so as not to have to paint practically any part (although I have had to).

If you have any questions or problems with the parts, do not hesitate to contact me and I will see how to solve it. Please share your makes!

I really hope you enjoy this model. I also include a base for the exposition of the Pokeball.

Pokemon

Pokeball

Pikachu