Search models, users, collections, and posts
Epson projector mount
IP Report
Print Profile(1)
0.2mm layer, 5 walls, 20% infill
Designer
10.9 h
3 plates
Open in Bambu Studio
Boost
28
73
0
2
44
10
Released
Bill of Materials
List other parts
- Epson ELPMB65 x 1:
Description
Easy access to all controls/ports and clears all vents.
The mounting hole should be close to the center of mass of the projector.
Mount that adds a VESA/tripod hole to an Epson CO-FH02 projector by attaching an Epson ELPMB65 mount to the projector.
Two straps pivot on the front and snap on the back with two locks to keep them secure.
The metal mount can be secured further by gluing and screwing in the optional support plate.
Designed for the purchase of an Epson ELPMB65 mount but possible to adapt for other VESA 75 mounts.
Printing
Printed in PLA with 5-6 wall loops and dense infill (>20%). Recommend brim for the two straps and one of the straps might need supports to print correctly.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)