55 mm Lens Cover
Print Profile(1)
Description
Hi,
I modified the model from 3Dsehrschoen and made it more aggressive for better grip.
Instructions:
After you printed everything, you have to put the little grips into the spring mechanism:
This can be really tough but after a few tries they should snap in and stay in place.
Afterwards, you put the spring mechanism into the main body:
The pin right in the middle should ensure that you have the correct orientation.
Next, put the lid on top and align the mechanism.
!Be careful not to use a lot of force, the pins on the lid break quite easily!
You have to press the springs a little bit outwards to put the lid on.
All thats left to do is turn the lid clockwise.
If the prints have good quality & you aligned everything right you should be able to turn it quite easy.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)