Search models, users, collections, and posts
Pikachu Pixel Puzzle
IP Report
This model is created by Pixel Puzzle
Make Your Model
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
22.5 h
6 plates
Open in Bambu Studio
Boost
67
108
2
3
68
19
Released
Description
Boost Me (for free)
Feel free to give me a boost if you like my designs :)
A great pixel puzzel from our favorite Electrical Pokemon Pikachu!
Hours of printing and puzzling fun :D
- 40x40 Panel
- 4mm Pixels
- No AMS required
Printing tips:
Be sure you build plate is clean and your printer calibrated as good as possible to avoid stringing.
If the plate warps turn off the auxiliary fan and add a brim.
Print slower if needed.
Color block information:
The hex codes of each color in the pixel blocks are listed below. You can use them to find the closest filaments.
Powered by MakerWorld-Pixel Puzzle Maker (https://makerworld.com/makerlab/pixelPuzzleMaker)
Thx for downloading and don't forget to give me a boost if you can!
Check out my other models:
https://makerworld.com/en/@Below3D/upload
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)