Search models, users, collections, and posts

Drive gear eg for Lego for MOC train wheel

Torge3D
Toys & Games>Other Toys & Games
IP Report

Print Profile(7)

All
A1 mini
X2D
A2L
P1S
P1P
X1
X1 Carbon
X1E
A1
H2D
P2S
H2D Pro
H2C
H2S
fuer A1 mini -PLA- 0.12mm layer, 6 walls, 15% infill
fuer A1 mini -PLA- 0.12mm layer, 6 walls, 15% infill
Designer
21 min
1 plate
4.9(13)
P1S - tighter axis - tight - 0.16mm layer, 7 walls
P1S - tighter axis - tight - 0.16mm layer, 7 walls
Designer
15 min
1 plate
5.0(5)
A1 Mini - tighter axis, tight, flex layer, 7 walls, Arachne
A1 Mini - tighter axis, tight, flex layer, 7 walls, Arachne
Designer
15 min
1 plate
5.0(4)
0.2mm layer, 5 walls, 15% infill
0.2mm layer, 5 walls, 15% infill
Designer
43 min
2 plates
5.0(3)
Click to see more
Open in Bambu Studio
Boost
71
202
60
9
336
237
Released 

Description

Content has been automatically translated.
Show original

Drive gear with washer and TPU ring for cross axle of construction blocks. This is my first upload, if something is missing, please let me know…

Boost Me (for free)

If you like my model, feel free to leave a comment, maybe with a picture or a boost, if not, feel free to write to me, maybe I can help or adjust something small.

Zug
railway
spare part
train
rad
wheel
brick
bricks

Comment & Rating (60)

(0/1000)
@user_1794794106
I can't even print it, not supported for bambu A1 Mini, and lego isn't that large!
The designer has replied
0
Reply
@Torge3D
Hi, I tried to create a compatible profile. You are welcome to test this out. Please print the PLA printing plate twice, the TPU once.
(Edited)
0
Reply
@user_1794794106
ok wasnt expecting response, anyways, I will test it, I don't have tpu I just have pla.
(Edited)
0
Reply
@user_1794794106
not sure what happened, both wheels came off during printing. Imma reprint.
0
Reply
@user_2746558886
Print Profile
fuer A1 mini -PLA- 0.12mm layer, 6 walls, 15% infill
Built the same
The profile uploader has replied
Show original
0
Reply
@Torge3D
Very nice, with a picture right away 😀👍
Show original
0
Reply
@vever
Print Profile
P1S - tighter axis - tight - 0.16mm layer, 7 walls
one wheel was lost Somewhere in my house... saved it ! works perfectly . used an O-Ring for grip
The profile uploader has replied
0
Reply
@Torge3D
Thank you, I'm glad
0
Reply
@hambob
Print Profile
fuer A1 mini -PLA- 0.12mm layer, 6 walls, 15% infill
about to build a Lego city and I needed a train thanks!! printed some more and my train is looking good!!
(Edited)
0
Reply
@Torge3D
Application example (right)
Show original
0
Reply
@67Clown
2 Stars, doesn't fit on LEGO Technic axles
The designer has replied
Show original
0
Reply
@Torge3D
You have to apply some force with the tight profile, for example, place the wheel on a wooden board and press down the rod, it is possible that something went wrong during printing, of course. Lego has incredibly tight tolerances between 0.01mm and 0.002mm, unfortunately, printers along with the filament may not hit it exactly. Scaling could help you with the PC software, maybe 99.6 or 100.4%, or try the normal profile. it worked for me with my p1s and geeetech pla
Show original
0
Reply
@67Clown
I used the A1 and Basic Filament
Show original
0
Reply
@67Clown
then I'll make it a bit bigger
Show original
0
Reply
@user_393732217
Boosted
Print Profile
fuer A1 mini -PLA- 0.12mm layer, 6 walls, 15% infill
3 of 8 had good Lego clutch power. the other 5 needed other pieces to stay on the axle
The profile uploader has replied
0
Reply
@Torge3D
Hi, sorry you're having trouble, just use the profile "narrower axis - tight - 0.16mm layer, 7 walls" - I'll upload a comparable profile for the A1 mini again, I overlooked that :) If you have problems with layer adhesion, wash the print plate with lukewarm water and a drop of dish soap, it works better for me than with isopropanol
(Edited)
Show original
0
Reply
@user_393732217
Boosted
that one worked thank you
0
Reply
@user_3302604066
how did you mount TPU ring to wheel?
The designer has replied
0
Reply
@Torge3D
Hi, I used a rubber ring, with TPU there are different viscosities, perhaps a different TPU type is needed that does not tear, adheres sufficiently, and is stable. I will try printing TPU in the coming days and printing the combined firmly bonded version with PLA and TPU and possibly create a new profile, maybe that would be something for you
Show original
0
Reply
@Torge3D
Take a look if this is something for you : https://makerworld.com/de/models/1810273-pla-tpu-pla-train-drive-wheel-for-iego-for-moc-tra#profileId-1931240
Show original
0
Reply
@christofer.jh
Boosted
Print Profile
fuer A1 mini -PLA- 0.12mm layer, 6 walls, 15% infill
works great!
The profile uploader has replied
profile
1
Reply
@Torge3D
Thanks for the (my) first feedback! :)
(Edited)
1
Reply
@fredthefish
thanks for this. do you have a model for the unpowered wheels please by any chance? without the groove for the elastic band
(Edited)
The designer has replied
0
Reply
@Torge3D
Hi you could delete the TPU on the other model here or choose the same color twice or? https://makerworld.com/models/1810273
Show original
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Brio Train Track Replicas
Brio Train Track Replicas
Cactus 973
7.9 k
2 k
Starter Set - KYZ Train Tracks
Starter Set - KYZ Train Tracks
KYZ Design
8 k
4.6 k
Classic Train Whistle
Classic Train Whistle
Yogimakes
9.5 k
3.1 k
Self Groomer For Cats
Self Groomer For Cats
Aditya Patel
9.7 k
6.1 k