Sinden Lightgun Pump Slider Replacement
Print Profile(1)
Description
This is a faithful reproduction of the pump slider for the Sinden Lightgun, modelled by myself using measurements from the original part for reference.
Should your slider break you can replace it easily with this part. The profile includes supports to hold up the bridge section during print, but in some cases you may be able to get away without it as any slight sagging that might occur in such cases doesn't interfere with the mechanism.
In some pictures you can see the original part next to the print for reference. Also some pictures show the printed part screwed into the pump grip using the original screws. Although not attached to the main lightgun (as you would not be able to see it, rendering the photo useless!)
I hope you never need to use this print, but if you do I hope that you find it helpful.
Boost Me (for free)
If my model has been useful to you, please consider boosting to say thanks, to support me and keep me motivated. 🙂 It's free!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)