Logitech G305 mouse Cover - Free 3D Print Model

Search models, users, collections, and posts

3DLG

Tools>Gadgets

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

(Hex Cover) 0.12mm layer, 4 walls, 30% infill

Designer

1.6 h

1 plate

4.6(47)

(Solid for Customising) 0.12mm layer, 4 walls, 30% infill

Designer

1.4 h

1 plate

Tree supports, easier removal, smooth

1.7 h

1 plate

4.2(10)

Open in Bambu Studio

Boost

212

443

1.3 k

878

Released

Description

Boost Me (for free)

Your boost is completely free but helps me continue developing free, high-quality 3D printable solutions for everyone. Thank you for your support! 🙏

Upgrade your Logitech G305 mouse with this custom 3D-printed backplate cover! This design replaces the original cover, offering two variations to suit your style and preferences:

Solid Cover – A fully enclosed design that mirrors the standard backplate for a clean and classic look.
Hexagon-Cut Cover – Featuring hexagonal cutouts to reduce weight and add a unique, eye-catching aesthetic.

Customizable Options
Both models are also available in .STEP format, making it easy to customize the design with your own logo or pattern using your preferred CAD software. Personalize your mouse cover and make it truly one of a kind!

Printing Tips
The model is optimized for horizontal printing with supports, as this setup worked best during my tests. However, vertical printing may yield an even cleaner result—feel free to experiment!

Whether you're looking to customize your mouse or simply enjoy a creative 3D printing project, this backplate cover adds functionality and flair.

Your support enables me to design, experiment, and bring new creations to life, so every boost, like and comment is greatly appreciated!

Membership

💼 Want to sell these models? Get a commercial license! Support my work and unlock commercial rights to sell these models. Perfect for makers who want to turn their passion into profit! 🚀

Join

Comment & Rating (73)

@073joppie

I printed it but I can’t push it further than this

The designer has replied

@3DLG

Check if all supports are removed on the push lips, or the little tabs on the bottem left or right. if these are blocked you won’t be able to slide it in.

@GS66

i very like it

The designer has replied

@3DLG

Cool!

@Kneesox

Boosted

Print Profile

(Hex Cover) 0.12mm layer, 4 walls, 30% infill

Slightly tight fit initially but once fitted properly works great!

The profile uploader has replied

@3DLG

Great to hear! share an image 😉

(Edited)

@Rlopez

Pretty decent print. After removing the rear tabs it fit on well enough. I had better luck carefully breaking off the tree support one at a time, instead of cutting them, and just took my time around the middle tab. No problem. I'll probably reprint to try and eliminate the stringing, I tried to clean those with a hairdryer, but started to deform the model before the stringing shrank away. I did use the hair dryer on the print when it was installed on the mouse to form fit the edges so it was snug and fit my warp. De-burring tool around the base where the brim was helped cleanup. Galaxy PLA sparkle doesn't show up well in photos, but nice upgrade to keep modding!

@amf_3625516103

Boosted

Print Profile

Tree supports, easier removal, smooth

Great! A bit of PITA to remove the supports but all is well.

@Raskarkappak

Print Profile

(Hex Cover) 0.12mm layer, 4 walls, 30% infill

Amazing Print !

@DankFrankStank

Print Profile

(Hex Cover) 0.12mm layer, 4 walls, 30% infill

quick & easy, can make my every day mouse different colors now. thank you!

@TomTomazack

Print Profile

(Hex Cover) 0.12mm layer, 4 walls, 30% infill

An absolute nightmare to remove support and a good 30 minutes just to cut away small fragments until it goes on the mouse. It looks cool and 2 hours of gaming later I can say my palm is not sweaty. Looks good, printed with PETG. Getting PLA come Monday so might give that a go and see if it differs a lot.

@spartan805

Print Profile

(Hex Cover) 0.12mm layer, 4 walls, 30% infill

Kool print. JAYO PLA on A1

@073joppie

Print Profile

Tree supports, easier removal, smooth

It fits

Other Issues:i had to break off the pieces at the back for it to fit

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.