Slim 6 in 1 Toy Lock Pick

6 tools in 1 slim profile lock pick tools

Tips:

• 0.2mm layer height prints perfectly and maintains strength
• Print with part solid. About 5 walls or do 100% infill
• The spacer is small,  use ARACHNE wall generator
• Use stiffer materials such as PLA, PLA-CF. 
• ABS or PETG are more flexible, which is bad for printed lock picks.

Assembly Instruction:

• Place a 1mm thick tool on one end of the first rod
• Place a spacer (1mm thick too) on the end of the second rod
• Repeat until 6 tools and 6 spacers are used up
• Place Upper part on and screw nut

Check out Lock Picks, OTF Pick, Rake, and Notch Decoder too:

https://makerworld.com/en/models/871283#profileId-823277

https://makerworld.com/en/models/890780#profileId-847397

https://makerworld.com/en/models/884829#profileId-839694

https://makerworld.com/en/models/874039#profileId-826439