Search models, users, collections, and posts
Replacement Deep 6 Diver
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 99% infill
Designer
2.4 h
1 plate
Open in Bambu Studio
Boost
15
27
5
0
10
3
Released
Description
This is a replacement for a size 2 deep six diver. My last one broke and they are very hard to find in local stores so I reverse engineered it and put the printed one together with all the hardware from the broken one, except the rear swivel where I used a split ring instead of the soldered ring.
The hole for the top locking bracket and the hole for the weights are slightly undersize so you can drill them to fit the fastener of your choice. I used a 3/16 pop rivet for the locking bracket and a M5 bolt/nut for the weights.
Boost Me (for free)
If you like my work, please consider giving me a boost, and check out my profile for more designs.
Membership
Commercial license memberships available for all of my designs.
Join
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)