Wacaco

cover

Wacaco_Picopresso_Drying_Board_002.jpg

Wacaco_Picopresso_Drying_Board_003.jpg

plate_1.png

plate_2.png

Colaia

PXL_20250526_041924686.jpg

PXL_20250526_042125974.jpg

PXL_20250526_042113230.jpg

<ul><li>Base = print on side</li><li>Plate = print flat 3.6mm on Z axis (-0.9mm)</li><li>0.2mm height</li><li>3 wall loops</li><li>Snug support with 20deg threshold angle</li><li>PETG = 8h30 + 2h20</li><li>PLA = 5h30 + 1h10</li></ul>

0.2mm layer, 3 walls, 15% infill

Ashtakul

PXL_20260102_014152118.jpg

PXL_20260102_014201527.jpg

PXL_20260102_014213517.jpg

Screenshot 2026-01-10 090359.png

I split the model to fit on my A1 Mini.The drying rack I aligned and added a spot of glue to each bottom corner to keep it together.For the drip tray, I used a soldering Iron to bond the two sides together to prevent any water from leaking through the bottom.

A1 Mini Split with dovetail for alignment.

https://www.printables.com/model/694426-gridfinity-picopresso

The original model was created by  <a target="_blank" href="https://www.printables.com/@mnitschke_103963" rel="nofollow noopener">@mnitschke_103963</a> and is available on <a target="_blank" href="https://www.printables.com/model/694426-gridfinity-picopresso" rel="nofollow noopener">Printable.com</a>. Some modifications have been made to place more parts, as well as the brush and WDT tool. A tray to collect water has been added, too. This model is no longer Gridfinity compatible.

Wacaco Picopresso Drying Board

ASIA

Print Profile(2)

Description

Comment & Rating (6)

This remix is based on

License

Related Models