Tiger in the snow - Monochrome HueForge
Print Profile(1)
Description
This is a HueForge design of one of the best photographs I have ever taken. It depicts the Amur Tiger, Dominika, who resides at the Highland Wildlife Park in Aviemore, Scotland during snowfall.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm
The Model is 150x105.63mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.2mm and the Actual Depth is 2.4mm
Filaments Used:
PLA+ Elegoo Black Transmission Distance: 0.8
PLA+ Elegoo Space Grey Transmission Distance: 0.5
PLA+ Elegoo Grey Transmission Distance: 12
PLA+ Elegoo White Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.92mm) swap to Space Grey
At layer #11 (1.4mm) swap to Grey
At layer #14 (1.76mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)