IKEA Skadis Non Marring Hammer/Mallet Hanger - Free 3D Print Model

Search models, users, collections, and posts

Ari B

Tools>Organizers

IP Report

Print Profile(1)

All

A1 mini

P1P

H2D

H2D Pro

P1S

H2S

H2C

P2S

X1E

X1 Carbon

X2D

A2L

0.2mm layer, 2 walls, 15% infill

41 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

109

174

Released

Description

Simple yet strong IKEA Skadis hook for the PITTSBURGH 1-1/2 lb. Soft Face Mallet from Harbor Freight.

Comment & Rating (17)

@w4ters

The print profile is no longer public

The hammer fits perfectly into the holder The holder clips easily into the SKADIS system Thank you for the model

The profile uploader has replied

Show original

@aborchew

Glad to hear it!

@Ferothz

Nice!

The designer has replied

@aborchew

Came out great - thanks for posting!

@tennisgent

The print profile is no longer public

Works well. The horizontal hooks printed a little rough on the bottom layers, which made the supports a bit hard to break off since that's where they attached. But I was able to make it work and then sand the hooks down a tiny bit so that they fit through the peg holes. 👍

The profile uploader has replied

@aborchew

Looks great - thanks for posting!

@MaverickThreeD

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect for hanging my soft-faced hammer on the side of my P2S.

@beardgineering

This worked out well for me also. The supports were tough to break off and needed a little clean up afterwards to fit but no big deal. Maybe because I used the same filament for the supports and it fused a bit too well. Super useful.

The designer has replied