Equal Space Divider - Free 3D Print Model

Search models, users, collections, and posts

Tito

Tools>Measure Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.7 h

2 plates

4.9(77)

Open in Bambu Studio

Boost

446

1572

113

849

603

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

PLA Basic

Description

This is my version of a equal space divider tool. My goal was to design my first tool and do something useful.

Minimum space: 16mm
Maximum space: 120mm

The current version has 4 spaces but it can easily be scaled to any number of spaces. Tell me in the comments if you need a bigger or shorter version.

For the assembly instructions, check the attached file.

Note: When locking the pins (expect resistance), press each one individually with a straight object (e.g., a metal ruler) to reduce finger strain and ensure alignment.
Tip: Place the assembly on a flat surface and press firmly with your thumb and the tool for better leverage.

Need a box to store your new tool? Check my custom box here.

Documentation (1)

Assembly Guide (1)

Equal Space Divider.pdf

Comment & Rating (113)

@user_1392005775

Print Profile

0.2mm layer, 2 walls, 15% infill

nice print easy to put together, and is fairly accurate so thumbs up

@Ramos_IRMI

What is the maximum height it reaches in the divisions

Show original

@user_1392005775

Replying to @Ramos_IRMI :

I have packed as I'm moving but I remember i got 6 or 6 inches between each point

@user_397731165

Boosted

Great design. It printed well and the tool operates smoothly and precisely. Thanks!

The designer has replied

@titonobre

Thanks. Nice combination of colors.

@Ramos_IRMI

What is the maximum height of the divisions it reaches

Show original

@user_4210987481

Great model! A small tweak to the design to ease assembly. I added an 'alignment zone' at the start of the female rivet to allow a better aligned initial start for inserting the rivets. This helps maintain the excellent tight clearances that you were able to achieve while helping avoid breakage and difficulty putting things together. That little feature takes this model from a 9.5/10 to a 10/10 IMO. I am glad to provide the .stls if you want them. Thanks again for a great model! Printed on H2D with PLA

@PNWPrinter

Boosted

Can you post or share your file? I'm printing this now and would love these. Thanks in advance!

@user_3850358672

Thank you for your work and this is a very good thing!

@msztolcman

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in dual color using PETG. And a bit longer then default :) Looks and works great, thanks!

@tepsley

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect in PETG, thank you so much, this comes into good use!

@hotbrass2005

Very cool. The tolerances on the pins are very tight. I ended up using my arbor press to set them easily and squarely. This model seems to work great and will be handy in the woodshop.

@josuecespedes

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent!

@user_1972702169

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great model. Printed in PLA.

@SlingerWannabe

Print Profile

0.2mm layer, 2 walls, 15% infill

This prints great and is much more precise than the other similar models. Over a span of 10 inches, the middle markers are within 1/32". All the parts fit together tight. A pliers wrench can make it a lot easier to push the rivets together while keeping them flat.