It is exactly what i was looking for and i lave that it fits so incredibly well.

thank you very much. 

Mo 3D Lab

0.2mm layer, 2 walls, 12% infill

daaang everything black like that looks so good!

theTobster500

Jens

I just uploaded a new print profile for hooks that make for a tighter/snugger fit.  I didn't like how loose/wobbly it was on the board and wanted it snug like the other controller ones I had.

Hopefully it helps someone else out.

drew_sf6

Sleepyy

Hunter

Amazing, exactly what I was looking for if it's perfectly too, and it fits perfectly 👌  thanks!

Bhlueskies

Great print! Controller fits perfectly but the only issue I had was the hooks didn't go into the body. I just snapped off the the springy parts of the bracket and glued it to the body. 

teegle

works well, had to use a glue clamp to get the hooks in though :P 

Little Benchy

son_of_artok

yeah literally. I’m having the same problem :(

user_3038341292

W-Astin

Adding to a larger project I'm working on.  These printed perfect and I can't wait to show. 

Pierce Pop Culture Designs

Toffee

cover

P.jpg

plate_1.png

2025-01-06_f194590d0b01b.jpg

IMG_1389.JPG

IMG_1388.JPG

I printed this in PLA Matte it matches better with the plastic on the ps5 controller

PlantPrints

PXL_20250518_193108551.jpg

I created this print profile so that myself, and others, could print both sets of hooks (flush mount + snap in) at the same time or alternatively deselect the set of hooks you don&#39;t want from the profile at time of printing. At the time of publishing there was two print profiles from the original creator requiring you to print one item, clear the bed, and start a new print if you wanted the flush mount hooks. With this print profile you can print everything in one single step.

DualSense Stand and both hook types

Rafy

IMG_20250304_162800.jpg

Removes attachments on the hooks. The flush backs allow to use superglue. Created cause there was no way the original hooks would&#39;ve bent correctly to fit in place

Flush Hooks, Mount with superglue

IMG_0479.JPG

The original PS5 controller holder was pretty wobbly once installed on the board and it was not tight and secure like the Xbox and Switch versions I had, which had a little extra part to hook into the hole below the main hole.  I added an extra pin to the bottom of the hook that will secure tightly into the hole below.  It is pretty snug so you have get it in there good, but it holds much better.&nbsp;The distance from the center of the hook to the pin that sticks out is 30mm.  I tested out in increments of .5mm an this was the best fit I found.&nbsp;I had some of the clips break off when installing but I just ended up super glueing everything in the end.

0.2mm layer, 2 walls, 15% infill

Inspired by agepbiz “Xbox Controller Stand for the Ikea Skadis”, <a target="_blank" href="https://www.thingiverse.com/thing:6780177" rel="nofollow noopener">https://www.thingiverse.com/thing:6780177</a>.&nbsp;I really liked how the stands for Xbox controllers are flush with the plastic and I just couldn&#39;t find one for the PS5 one so I made my own. This was my first time modeling something like this and especially my first time doing something precise in cad.&nbsp;The stand is a little loose on the board and the clips barely fit in place, I bent the clips in enough to the point where it fit.

Print Profile(4)

Description

Comment & Rating (74)

License

Related Models

PS5 Controller Stand for Ikea Skadis

Print Profile(4)

Description

Comment & Rating (74)

License

Related Models