ZombieH20
Print Profile(1)
Description
Project: Zombie.hfp
Print at 100% infill with a 0.12 mm layer height and a 0.32 mm base layer
The model measures 200x200 mm
Higher layer heights may be used below the minimum 0.32 mm depth
Maximum depth is 2 mm and the actual depth is 2 mm
Filaments used:
ESUN BLACK PLA Transmission Distance: 0.2
BambuLab Basic Blue Gray PLA Transmission Distance: 3
BambuLab Basic Jade White PLA Transmission Distance: 5
This print utilizes 3 unique filaments
Switching instructions:
Begin with BLACK
At layer #5 (0.8 mm), switch to Blue Gray
At layer #8 (1.16 mm), switch to Jade White for the remainder
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)