Aerodynamic Glider - Free 3D Print Model

Search models, users, collections, and posts

Occupied Brain

Toys & Games>Outdoor Toys

IP Report

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 6 walls, 100% infill

Designer

29 min

1 plate

4.0(69)

92%,0.2mm layer, 6 walls, 100% infill

29 min

1 plate

4.5(23)

Open in Bambu Studio

Boost

245

438

105

1 k

786

Released

Description

A simple one print ‘aerodynamic’ glider!
Layer Height : 0.2mm
Infill : 100%
Infill direction : 135

Material : PLA; will be trying out in PETG soon
This print needs a good first layer!
The extra weight model requires a M5 10mm bolt in the front to add weight.

This lightweight 3D printed glider uses the limitations of 3D printing to create an ‘Airfoil’ which keeps the structure light but adds a huge value to the aerodynamics of it just like a regular aircraft. You will have to not use the full force of the rubber band as the weight
Flies very well INDOORS.

Comment & Rating (105)

@Sevro

Interesting idea, but in my case it doesn't fly very well. Printed in PLA, 100% infill, added some weight to the nose, raised the rear flaps. You should add a video of how it flies in your case.

The designer has replied

@occupied_brain

hello, I have uploaded a gif, please check. one thing which you will have to keep in mind is the weight of the head and the force applied, If you use full strength of the rubber band it will crash as it does not have enough weight in the front. Try launching it with half force and it will fly. I also have uploaded an updated file with more weight in the front and also a provision to use an M5 bolt to add more weight. Hope this helps, thanks :D

GIF

@PaNTerA

Boosted

Printed from PLA Aero. My son is delighted.

@cadenscreations

Print Profile

0.2mm layer, 6 walls, 100% infill

good

@user_107850898

Doesn’t fly

@SamK28484

Print Profile

0.2mm layer, 6 walls, 100% infill

Neat little glider! Looks good. Thanks!

@akg1

Print Profile

0.2mm layer, 6 walls, 100% infill

good print!

@kuhnikuehnast

Print Profile

0.2mm layer, 6 walls, 100% infill

A littlebit fragile - didn't hold.

@Jmoritz97

With PETG and a cooled off bed, the wings break at the fold points. With PETG and scraping it off while the bed is hot is best, but then need to be careful on how it bends. See the pics. This is with designers settings on a P1S with gold Bambu PETG basic. Will try again with PLA.

(Edited)