Earth God Cassius - Fully Disassembled Version

Assembly Reminder

Approximate size: 15cm long and wide, 25cm high

It is not recommended to make it smaller, as some pegs will be very difficult to assemble if it's smaller

The pegs for each part's holes are located near them on the build plate

Some pegs might require trimming I adjusted them according to my machine and filament but it's still recommended to trim them slightly with a knife if they don't fit

Head Section

Ear Armor

The peg for the yellow part is in the upper position

The slightly flat part under the blue section should touch the bottom of the build plate

Eyes

Bottom face outwards

Body Section

Neck

The scarf is inserted from above the blue neck

Shoulder Armor

The part touching the build plate faces downwards

Hip Armor

The pointy part faces backward

Tail

The peg at the base of the tail (optional) it can be stably inserted without it but the hole is there

Hands

The wider parts of the two middle pieces face downwards the pegs are not perfectly square they are slightly askew

Claws

The base of the claws is slightly offset but they match the shape of the hands since the insertion pegs are the same it's not a big problem even if the left and right hands are swapped

Legs

Assemble in order to easily identify left and right parts

1. The part connecting to the hip connects first to the upper thigh
2. The lower thigh connects to the calf
3. The upper and lower thigh sections connect

Thighs

This is a slide-in peg (the demonstration image is just a test piece the upper part should actually be white)