KitchenAid Cable Braket 7mm EU Power Cable

I have to give credits to the user Beck with his initial concept of the cable braket 

https://makerworld.com/de/models/884573?from=search#profileId-839403

I guess this was made for US power cables but for the EU KitchenAid machines it´s not working to hold the cable. Thats why I made some modifications to Beck´s concept.

Design and measurements are almost the same my radi are a bit different. Here are my major changes:

• adjusted the hole diameter to 7mm for European cables and also adjusted the depth of the hole pocket so the cable is holded in a better way and fits better
• put a R100mm radius on the bottom surface to match the curved housing of the KitchenAid Artisan with double sided tape it fits perfect

My model is a improvment to the ogirinal, but since I can´t share a remix I put this model as original. So please all credits go to Beck for his job. This is a EU modification to better hold the thicker cable of 7mm in diameter.