Search models, users, collections, and posts
Flared AR15 Magwell V1.1
IP Report
Print Profile(3)
0.12mm layer, 8 walls, 95% infill
1.8 h
1 plate
0.2mm layer, 5 walls, 95% infill
1 h
1 plate
Oberland Arms Black Label 0.08mm layer, 4 walls, 30% infill
2.4 h
1 plate
Open in Bambu Studio
Boost
668
2048
125
79
2.3 k
1.4 k
Released
Bill of Materials
Bambu Filaments
Select all
.jpg)
Description
Flared AR15 Magwell by Qwerm
A simple clamp-on flared magwell for AR-15's.
Orientation: Print on it's bottom face.
Changelog:
V1.1 - Added heat set insert version
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0mm
Parts Needed:
2x M4 25mm Socket Cap Head Screws
2x M4 Nuts OR 2x M4 Heat Set Inserts
EbenezerMudgett made a remix that fits Aero Precision lowers: https://odysee.com/@EbenezerMudgett:9/Flared-AR-Magwell:8
Boost Me (for free)
Thank you for checking out my model. And thank you to everyone who likes and boosts my models, it helps me out a lot more than you may think!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (3)
Click to see more
Comment & Rating (125)