martin.taichl

cover

2023-12-16_jupve4p3yarm.jpg

2023-12-16_iv23nwpsrak6.jpg

2023-12-16_nhdku777o5zn.jpg

2023-12-16_k1amcvxi6f2o.jpg

grey

plate_1.png

blue

plate_2.png

dark grey (red)

plate_3.png

bronze (blue)

plate_4.png

plate_5.png

grey + black

plate_6.png

grey (dark grey)

plate_7.png

plate_8.png

plate_9.png

Multicolor

plate_10.png

black + grey

plate_11.png

Dice & Dragons

IMG_20240119_112404_5cd4facb-39c7-4739-b4cc-93167cba4b01.webp

IMG_20240118_165320_a6a2bee9-d405-4eae-9659-39964e52c1ef.webp

IMG_20240119_112410_f12dfd9a-24a4-49ec-a076-4c9b6dcdbaa3.webp

Model has some slight colorization. The bed name says how to print. First is the main color. If there is another color in brackets, you can use it with AMS or just reduce the colors and print it solid in first color.If there is a + in the bed name, there is a color change at layerheigth and its mandatory. No AMS needed!I did not colorized all windows. The NCC Number on the side may have Issues with a 0,4 Nozzle. but it works.&nbsp;Choose one plate for the stand. Multicolor needs the AMS. The other makes it all with one color change. Here I also added a modifier to make the stand stable in the area where the pin starts. The rest is only slightly filled.&nbsp;0.16mm layer, 2 walls, 10% infill&nbsp;

0.4er Nozzle - slightly colored - No AMS

Saucer Top .20 Nozzle

Saucer Bottom .20 Nozzle

Dark Grey

Nacelle Trim

Bronze Parts

Nacelles

Nacelle Tips

Secondary Hull .20 Nozzle

Dish

Logo1 .20 Nozzle

Connectors

Stand

plate_12.png

Spine .20 Nozzle

plate_13.png

Saucer Top Ring

plate_14.png

Nacelle Coils

plate_15.png

Nacelle Shield

plate_16.png

jnangano

IMG_5864_646451e3-025d-400b-ab1e-9ead10406ff0.webp

You should use the .20 nozzle where indicated or you will lose detail in the windows.&nbsp;Filament List Hatchbox Red Hatchbox White HatchBox Black Bambulab PLA Support Hatchbox Cool Grey Hatchbox Ash Grey Hatchbox Copper Hatchbox Stone Grey Polymaker Silk Light Blue Hatchbox Grey DO3D Silk Red DO3D Silk Silver Eryone Silk Gold&nbsp;Plate 1 Saucer Top .20 Nozzle .10 Layer Height AMS1 Hatchbox Red AMS5 Polymaker Silk Light Blue AMS2 Hatchbox Stone Grey AMS6 Hatchbox Copper AMS3 Hatchbox Cool Grey AMS7 Hatchbox Grey AMS4 Hatchbox Ash Grey AMS8 Hatchbox White Plate 2 Saucer Bottom .20 Nozzle .10 Layer Height AMS1 Hatchbox Red AMS5 Polymaker Silk Light Blue AMS2 Hatchbox Stone Grey AMS6 Hatchbox Copper AMS3 Hatchbox Cool Grey AMS7 Hatchbox Grey AMS4 Hatchbox Ash Grey AMS8 Hatchbox White Plate 3 Dark Grey .40 Nozzle .16 Layer Height AMS1 Hatchbox Ash Grey Plate 4 Nacelle Trim .40 Nozzle .16 Layer Height AMS1 Polymaker Silk Light Blue Plate 5 Bronze Parts .40 Nozzle .16 Layer Height AMS1 Hatchbox Copper Plate 6 Nacelles .40 Nozzle .16 Layer Height, Manual Supports. AMS1 Hatchbox Cool Grey AMS2 Bambulab PLA Support Plate 7 Nacelle Tips .40 Nozzle .16 Layer Height AMS1 DO3D Silk Red Plate 8 Secondary Hull .20 Nozzle .10 Layer Height, Manual Supports. AMS1 Bambulab PLA Support AMS5 Polymaker Silk Light Blue AMS2 Hatchbox Stone Grey AMS6 Hatchbox Copper AMS3 Hatchbox Cool Grey AMS7 Hatchbox Grey AMS4 Hatchbox Ash Grey AMS8 Hatchbox White Plate 9 Dish .40 Nozzle .16 Layer Height AMS1 Hatchbox Ash Grey AMS2 Hatchbox Copper Plate 10 Logo1 .20 Nozzle .10 Layer Height AMS1 Hatchbox Cool Grey AMS2 HatchBox Black Plate 11 Connectors .40 Nozzle .16 Layer Height AMS1 Hatchbox Ash Grey Plate 12 Stand .40 Nozzle .16 Layer Height AMS1 HatchBox Black AMS2 Hatchbox White AMS3 DO3D Silk Silver AMS4 Eryone Silk Gold Plate 13 Spine .20 Nozzle .10 Layer Height AMS1 Hatchbox Red AMS2 Hatchbox Cool Grey AMS3 Hatchbox Grey AMS4 Hatchbox White Plate 14 Saucer Top Ring .40 Nozzle .16 Layer Height AMS1 Hatchbox Ash Grey Plate 15 Nacelle Coils .40 Nozzle .16 Layer Height AMS1 Hatchbox Ash Grey AMS2 Hatchbox Copper Plate 16 Nacelle Shield .40 Nozzle .16 Layer Height AMS1 Hatchbox Cool Grey

0.16mm layer, 2 walls, 15% infill

grey+bronze+dark

Grey + Red

grey (dark grey) 0.4

grey 0.4

Silk Red

4S3D

20260125_115119(1).gif

20260125_114827.jpg

20260125_112642.jpg

20260125_112728.jpg

20260125_113011.jpg

20260125_115042.jpg

20260125_112632.jpg

This profile reflects my multi-color interpretation of the USS Enterprise-D, created as a high-detail, display-focused build. The goal was to emphasize panel separation, structural contrast, and iconic Trek elements while keeping the ship visually cohesive when viewed up close.Color choices and intent:<ul><li>Bronze – bulkheads and structural accents to add warmth and depth, a special bronze detailed photon torpedo array</li><li>Off-gray – hatches, doors, and surface panel breaks</li><li>Dark gray silk – phaser arrays for subtle contrast</li><li>Red - on details of ship</li><li>Silk red – nacelle caps and thrusters</li><li>Silk blue – nacelle glow sections, tractor beam (with bronze)</li><li>Reoriented nacelles to take away the line in the middle when joining (printed standing up with supports)</li></ul>The print was completed primarily on a Bambu H2D and required just under 7 days of total print time. Multicolor transitions were used extensively, but waste was manageable and well worth the final result.&nbsp;Post-processing and coloring took several additional hours, with the black/white window detailing being the most time-consuming part. While tedious, it significantly improved depth and screen-accurate appearance in person.&nbsp;This build was done as a gift for a Trek-loving teacher, making it a true labor of love. Huge credit to the original designer for an outstanding model—this profile is shared purely to help others who want a similar color treatment or reference for their own builds.

Fully Painted - Overdetailed w/ Updates

This is 3D printable model of the Galaxy Class NCC-1701-D Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of the necelles and some details need to be separated into separate models in the slicer ;) In the suffix of the files, there are color codes: g-grey bl-blue d-dark br-bronze r-red For the assembly, please have a look at the following video. <figure class="media"><div data-oembed-url="https://youtu.be/Tcv-LP7k0Ig?si=r4SqwM9fLPPYclmV"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Tcv-LP7k0Ig" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Enterprise-D Galaxy Class

Dahofrin

Enterprise-D Thicker Supports for Nacelle struts  

IMG_5885_0b0d9340-f795-4c21-8802-4e6993d8487f.jpg

Wall mount for Enterprise-D by Martin.

ASIA

Print Profile(3)

Description

Comment & Rating (147)

License

Remixes (3)

Related Models