Gonggi from Squid Game, hollowed for metal beads

*THIS IS A DIGITAL FILE for 3D Printer ONLY, AND NOT THE PHYSICAL PRODUCT ITSELF! *

-------------------------------

UPDATE 12.01.2025

Since there are users who don't use Bambu Studio / dont have a BambuLab printer, I added the STL files of the gonggi pieces with holes in them. If you're using different slicer programs, you may want to add support blocker at the middle part of the gonggi. Likewise, you can turn off support and only modifiy the lower bottom of the gonggi for support.

Add pause at height 13 mm. The G-Code for pause is M4000 U1.

--------------------------------

A lot of gonggi models here are a bit too big, so these models are smaller and are almost similar in size with the original gonggi pieces.

I also made holes inside them, and you can fill them with metal beads like these ones:

https://geni.us/jPg7oj 

The weight of each piece filled with the beads is around 5-6 g.

If you don't have beads, you can also fill them up with tiny stones or 10 mm hex nuts (thanks Domsdedom for the info!). 

The print pauses at height 13 mm, so place some beads inside it and make sure not to fill them up to the top. Leave a bit of space so the nozzle wont crash into the beads. Then just hit resume and it will first print 3 layers then proceeds with closing the hole.

 I also made a case so you can store the gonggi pieces. You add your own text on the lid of the case, so that's why i leave it blank.

Here's the tiktok video of the print: https://www.tiktok.com/@lukis3d/video/7456541215832542497

Here's the tutorial on how to play it: https://www.tiktok.com/@lukis3d/video/7455803537545547041

*Disclaimer: As an Amazon Associate, I earn from qualifying purchases. If you purchase a product trough any of the links I may make a commission at no additional cost to you.