2.125 inch Vinyl Holder Wall Mount

This is a wall mount for 2 1/8 inch (or smaller) vinyl rolls. Each of these pieces holds three rolls. These rolls have a slide on the bottom so that they can connect together with some strength. I have used them in long lengths and they became wobbly so I included a holder for any one of the holes so that the long sections of mount are stable and won't drop your rolls. Putting the pieces together was relatively easy for me to push them together. For some people using a rubber mallet (or other soft object to hit items together)  might be beneficial to help push  them together. There is a screw hole on the back so that it is easier to hang them on a wall or other hard object. I personally used the side of an IKEA cabinet so that I can have more storage then before.

To use this model I encourage you to use screws that will not go all the way through your surface but be strong enough to hold all of these vinyl rolls. I personally used 1 ¼ inch screws as to not go through the surface of the wood. If you want more than nine holes then you should print the middle piece (the piece that has multiple connecting slots on it) multiple times or however many holes you want.

This is my Vinyl Wall, if you like it boosts are greatly appreciated. If you have any questions please write a note, hope you enjoy my model!