Search models, users, collections, and posts
mustang 60
IP Report
Print Profile(1)
A1 Mini Ver 91mmx122mm 0.08mm layer, 2 walls, 100% infill
2 h
1 plate
Open in Bambu Studio
Boost
18
43
2
2
25
4
Released
Description
mustang 60 plase visit my perfil for more designs
https://makerworld.com/en/@javier3xa5
Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 114x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Jade White
At layer #15 (1.52mm) swap to Yellow for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)