D&D Conditions Box - Free 3D Print Model

Search models, users, collections, and posts

Masambi

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

P1S

P1P

X1E

H2D

A1 mini

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill no support

Designer

12.9 h

2 plates

4.9(11)

0.2mm layer, 3 walls, 15% infill A1 mini no support

Designer

13.5 h

2 plates

4.0(1)

Open in Bambu Studio

Boost

111

151

Released

Description

I found some nice Condition rings/markers made by CraftyFox3D, https://makerworld.com/en/models/790621?from=search#profileId-728966

and I wanted a smaller box for these rings. So i made this 44 slots box with a hinged lid and a lock. This box can just be printed as is, and need no support.

conditions ring holder

condition rings

print in one place

hinged box

Comment & Rating (21)

@Reichiroo

Boosted

Great design, turned out perfect!

(Edited)

The designer has replied

@Masambi

thanks for the comment and rating! : )

@poiromaniax

Print Profile

0.2mm layer, 3 walls, 15% infill no support

Came out great - only "issue" I have is that its very difficult to open - the clasp is very tight. Hopefully that will loosen with time.....

The profile uploader has replied

@Masambi

Hi! Nice to see the box in use! I see your comments, and made a new plate on the print profile with a looser clasp. If possible, try and file down the small "pyramid" on the inside of the clasp. This will make the lid easier to open.

@poiromaniax

Replying to @Masambi :

Thanks, thats exactly what I ended up doing :)

(Edited)

@risi2112

pretty great, thank you for making a version that prints on the Mini! as others have mentioned, the corners came up for me, but otherwise it's great!

The designer has replied

@Masambi

Glad you liked it, nice color! I have added a new print profile with brim/elephant foot for the A1 mini, hope this helps with the warping on the corners. Just wondering, did you use glue on the build plate?

@shadoesong

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill no support

It was a good print. The corners lifted a bit but it didn't compromise the print. Thanks to the OP who designed the box.

The profile uploader has replied

@Masambi

Glad you liked it! : )

@Ltskitzo

Print Profile

0.2mm layer, 3 walls, 15% infill no support

I padded out the top, so the disks cant fall out and move around - that helped greatly. Plus I'm not quite sure what the front most pockets are for. But apart from that, this is a really nice design.

The profile uploader has replied

@Masambi

Thank you, glad you liked my box. Do you use CraftyFox3D condition rings? or do you use a different kind? CraftyFox3D rings are 37.5 mm, and should not fall out. I use the first row for rings aswell. Its possible to make a shorter box, what are the dimensions for your rings? : )

@Dazta

Print Profile

0.2mm layer, 3 walls, 15% infill no support

Flawless, Great design kind person!

The profile uploader has replied

@Masambi

Thank you, glad you liked it!

@jkopian

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill A1 mini no support

prints we’ll. no issues

@user_2446685963

Print Profile

0.2mm layer, 3 walls, 15% infill no support

perfect print. works great.

@MelisseFern

Print Profile

0.2mm layer, 3 walls, 15% infill no support

@woutsa

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill no support

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.