Wobbly Life Figure - Free 3D Print Model

Search models, users, collections, and posts

3DDAD5000

Miniatures>Creatures

IP Report

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

8.9 h

1 plate

4.0(42)

Open in Bambu Studio

Boost

322

722

1.2 k

480

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

PLA Basic

Nature (65102) / Filament with spool / 0.5 kg

Support for PLA/PETG

Description

A Wobbly Life Wobbly!

Modeled in Fusion using screenshots from the game, and the first proportionally correct model I could see on the internet!

Printed in PLA w custom supports.

Note: Unfortunately many Wobbly's sacrificed an arm or half a head to get custom supports that were strong enough, but minimized to still allow easy and clean removal.

Boost Me (for free)

Boost are always appreciated!

As this is my first model, always open to feedback on how this could be improved!

Comment & Rating (76)

@G07hF47h3r

love this little guy .. .. printed this for a birthday cake topper i seperated the head from the body to cut down on supports plus i also seperated both eyes to print seperatly in black as i dont own a multi coloured printer ;) thank you for such a great model

@K1W1_Chris

can you share the file for the separated model you created?

@M215

Seconded. Could you please share a print profile for the separate pieces? 8hr print time for this simple model seems a bit excessive due to the 2 eyes.

@gcorgnet

thirded. would appreciate the files, thanks

@Foxy_11111

Boosted

Cool model, printed great, fits grandma perfectly

(Edited)

Show original

@dummy1000

where do you got grandma?

@Foxy_11111

Boosted

From this creator

Show original

@user_3557876281

Print Profile

0.16mm layer, 2 walls, 15% infill

I shrunk it to 60% and added a loop to add a keychain. Printed in PETG. Single color. Used black nail polish for the eyes.

The profile uploader has replied

@3DDAD5000

Amazing! Love it!

@byOllie

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Excellent model, a bit of black showed up inside the head, only the tips of the eyes should be black

Show original

@FrodoBagginses

there’s a setting to print a filament change tower next to the model that will clean up this and fix the issue

@user_2187793500

Great part. Scaled up 125%. But need to print again once I've figured out why the black hadn't quiet purged enough through into the tower and still ran in to the yellow. Would it be possible to sepperate the black eyes to print separately and press in after. Would speed up the print loads too.

(Edited)