FotisMint

cover

2024-12-15_k7lyp2jvy1an.jpg

plate_1.png

plate_2.png

Photoroom_20250107_093626.JPG

P1911677.png

P1911671.png

0.2mm layer, 2 walls, 10% infill

Spirit Technology

20250105_160232.jpg

20250105_160236.jpg

20250105_160240.jpg

20250105_160245.jpg

Gandalf Figure – Lord of the Rings Slicer Preview.png

Be careful removing the sword and staff.10% infill on the figure15% on the staff and sword

0.2mm layer, 2 walls, 10% infill on the figure (In Parts)

Addicted2Filament

20250313_155604.jpg

This is a miniaturized version of this excellent Gandalf model.  The size is 39.33% of full, which makes Gandalf 59mm tall (not counting the staff or sword).  I used customized supports to keep filament use low while ensuring a quality print.  The staff and sword are flat on the build plate for reduced supports and better quality.  PLEASE NOTE the sword and staff are fragile and care should be exercised when removing supports.  Tweezers may be useful.

Mini Gandalf (39.33%) - 0.12mm layer, 2 walls, 10% infill

hammm_sammich

IMG_9434.jpeg

Changed some support settings to make the supports come off super easy.  Some cleanup still required on the sword and staff.

0.16mm layer, 2 walls, 10% infill

3dmastermaker

IMG_1414.jpg

gandalf3.PNG

0.16mm layer, 2 walls, 15% infill

AJ247:)

Image_20250531_163841_368.jpeg

Image_20250531_163841_468.jpeg

Image_20250531_163841_561.jpeg

Print with supports, I put 2 wall supports because i had trouble with them falling mid-print5% infill

0.2mm layer, 2 walls, 5% infill

plate_3.png

20260201_123237.jpg

20260201_123242.jpg

20260201_123246.jpg

20260201_123258.jpg

Multi-Color, High Detail, 0.12mm layer, 2 walls, 10% infill

Faultless

IMG_1212.jpeg

IMG_1215.jpeg

IMG_1216.jpeg

This profile is designed for H2C printers. It uses a dual nozzle setup to print the model with PLA and employs PETG for support material to facilitate easy removal. With PETG support interference, support material can be removed effortlessly without applying force. I also included screenshots of my print to demonstrate how easy it is to separate these objects. My print used BambuLab Matte Ivory White as PLA and BambuLab Translucent(Colorless) PETG for interference support. Gandalf uses 0.2mm layer height, %10 Gyroid Weapons use 0.2mm layer height, %15 Gyroid Ensure your filament is dry, with a humidity of 10% or lower, and keep the chamber temperature at 30°C or below during printing.

PLA Main/PETG Support, H2C Optimized, 0.2mm layer, 2 walls

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

If you like my work and want to support me bringing you new content please consider supporting me on <a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/FotisMint">Patreon</a>

Gandalf Figure – Lord of the Rings

ASIA

Print Profile(8)

Description

Comment & Rating (860)

License

Related Models