Mini Might Arbor Press Tool Tweaked Some

This tweak includes dies for the arbor, AvE badge for the front, and the high stress parts separated to be printed in PA612-CF15. Also has some body parts open to reduce material and add strength in some areas.  The rack and pinion plate also has opening for viewing of the mesh. The nut recess that is drawn into the hand wheel will hopefully be the weak point.

The die plates have a couple of examples and blanks, eventually I plan on making the disk so you can have more jigs and options. The dies are a snug fit so they stay on the arbor. Roll the arbor up and pop them off is the laziest way to remove them. 

The PETG attached to the nylon prints is to keep it secured. It will pull apart after print. 

Does have a known issue, the screw for the hand wheel screw, the screw goes to deep and will bind against the wheel and unscrew. Don't know why there are 5 screws, but you will may break 1 so nice to have spare. 

Go to the original model for assembly instructions if you need them, they did a nice video.