Articulated Palico

Acquire your ultimate hunting companion!

获取你的呆猫！

This articulated toy is based on the "Kit T" Palico layered armor set from Monster Hunter Rise

本可动玩具是根据《怪物猎人：崛起》中的追加艾露猫外观装备“猫系列”皮肤设计制作的。

The print is segmented into two components to leverage five colors while minimizing waste. Assembly requires gluing the two sections together.

本模型分两部分打印，以便在运用五种颜色的同时减少浪费。请使用胶水将两部分粘合在一起。

To ensure printing success, minimal brim and support structures are incorporated. These are easily removed and strategically placed in inconspicuous areas.

为了保证打印成功，模型含有少量易于拆除的且不易察觉的brim和支撑。

An 8x3 millimeter magnet recess is integrated into the rear. Adjust the dimensions in your slicer to accommodate your preferred magnet. (Increase the recess by 0.2-0.3 millimeters exceeding the magnet's actual size)

背面可插入8x3磁铁一枚。你可以在切片软件中修改磁铁大小。（孔洞应比磁铁本身大0.2~0.3mm）

For further waste reduction, manually enable flush options. Note that insufficiently dried filament may lead to color-discrepant stringing when these options are activated. They are deactivated by default.

通过手动打开冲刷到填充与支撑可以进一步减少浪费。请注意如果耗材受潮，这样打印产生的拉丝可能与表面颜色不同。冲刷设置默认关闭。

Employing a 0.7 flushing volume multiplier yielded a clean print while minimizing waste. Adjust this value upwards for superior color fidelity or downwards for enhanced waste reduction, acknowledging the potential for color blending.

我将冲刷体积乘数设置为7.0以在减少浪费的同时保证颜色干净。提升乘数可进一步保证色彩质量，而减少乘数虽然可以进一步减少浪费，但也更可能造成混色。

Filaments used in the demo/展示耗材一览:

A fledgling 3D modeler, your critiques, suggestions, and encouragement are invaluable in my ongoing journey!

我是一名3d建模初学者，你的评论、反馈、支持可以让我在这条道上走得更远！