DJI CASE BOX FOR ACTION 1,2,3,4,5 POCKET 2, 3

YOU WILL NEED

X6   M3  45mm bolts

x6   M3 nuts

or  

x6 M3 40mm bolts, screw into the plastic , maybe needs a small pilot hole made with a drill bit or a m3 tap and die set would also help with this method.

when printing, to achieve the same effect as pictured you will need to change filament on the layer that the dji logo starts and print for at least 2 layers and then pause the print and swap back to the original filament.