Ski Boot Spoiler

Welcome Ski enthusiasts!

If you are suffering like me from thin calfs and look for a easy, printable shaft volume reduction, search no longer! This boot spoiler printed in TPU will help you to get a better fit in your skiboots without braking a bank or the need to visit a bootfitter. The main purpose is to reduce Volume around your Calf / Shin Area so you dont need to crank down your buckles too much.

It is designed based on Scparpa F1 shoe spoilers and will roughly add 4mm of heigt compared to the original spoiler. It will increase lean angle by roughly 1 - 2°. The side “wings” of the spoiler add some comfort and some aditional volume reduction

I attached mine with some velcro tape without stitching the tape to the spoiler, but if you want to ad some additinal strength to the velcro you can use the holes for sewing the velcro to the spoiler

The Spoiler will fitt the whole F1 Family and also all other Skiboots with some Velcro Attachment on the Liner. Please give Feedback if you have tried it!

If you like my work or need something speciall let me know and follow me!

if you want to buy me a coffe, here is my ko-fi page: https://ko-fi.com/i1985