TIC TAC GUN 2 Unbranded - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

3DeeMagic

Tools>Gadgets

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3 h

2 plates

4.5(197)

0.2mm layer, 3 walls, 15% infill

3.3 h

2 plates

4.5(21)

0.24mm layer, 2 walls, 15% infill 1 plate multicolor

4.5 h

1 plate

4.8(4)

0.24mm layer, 2 walls, 15% infill 2 plate multicolour

2.7 h

2 plates

5.0(3)

Open in Bambu Studio

Boost

2628

6095

324

6.4 k

4.4 k

Released

Description

Introducing the unbranded version of the amazing TIC TAC GUN 2 by dylcro2!

this remix removes the branding from the blaster for those who prefer to use unbranded items plus it makes the print a lot easier and simpler.

Required items: 3 x M3x16mm bolts, 1 x M3 x 20 bolt, 4 M3 hex nuts, standard pen spring

How to build:

Install a standard pen spring on the little tab near the back of the gun.
Place the 4mm spring barrel into the slot.
Line up the trigger with the middle hole on the right side piece and make sure that it all moves smoothly.
Place the 49g mag adapter into the top slot of the gun.
Install the left side of the gun using 4 m3 x 20 bolts and 4 m3 hex nuts then screw it all together.
Open your tic-tac's and remove the lid, slide the cartridge into the adapter at the top of the gun and now you are ready to fire away! 🔫
if the tic-tac's get jammed simply give it a shake.

An optional elastic band can be added for insane power!

Big thanks to dlycro2 for the original model.