Lock Pick Toy (9 in 1 Multitool)

Choose 9 attachments to print and assemble this multitool.

Print Lower, Upper, 2 Nuts, and 9 spacers.

The nut is hard to screw on with hand, use a tool if possible.

• Print threaded parts in high-quality settings. (i used 0.16mm layer height)
• Print with part solid. About 5 walls or do 100% infill
• The spacer is small,  ARACHNE wall generator worked for this part
• Use stiffer materials such as PLA, PLA-CF. 
• ABS or PETG are more flexible.

Assembly Instruction:

• Place a 1mm thick tool on one end of the first rod
• Place a spacer (1mm thick too) on the end of the second rod
• Repeat until 9 tools and 9 spacers are used up
• Place Upper part on and screw nut if needed (The lid can be press fitted without nut)