Print Profile(2)
Bill of Materials
Description
Bambu Lab included LED kits in their Black Friday gifts. This fixture is a stylish way to make use of them!
Note: No AMS needed, since the base and flower are printed on separate plates
Boost Me (for free)
If you enjoy the model, please support me by leaving a boost and showing off your print in the ratings!
The design is based on the Lotus Temple (Baháʼí house of worship) in New Delhi.
Print settings flower:
I recommend printing the lotus flower itself using a 0.2mm nozzle (if you have one), because the thin overhangs at the top will be sharper, and the layer lines less obvious. I have also tested with 0.4mm, which also worked fine.
- Support 30° (The highest arches shouldn't need any support, just lower arches)
- 4 walls (prevents infill in shine-through regions)
Print settings base:
The default 0.4mm nozzle should work fine for the base.
- Top & bottom surface patterns: Archimedian
- Sparse infill: gyroid
- No infill needed
Assembly
I recommend gluing the flower onto the base connector. That way, it stays secure and you are still able to remove the light using the thread.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)